Details

CG2WA Tile Grout

Cement based grout for narrow (F) joints between ceramic tiles and / or natural stones. No requirement for mixing with enhancing latex. Suitable for interior, exterior floors and walls, facades, showers, under floor heating installations.

  • Consumption: Depending on the application
  • Package: Plastic bags 5 kg
  • Pallet: 720 kg

Download the Datasheet

All You Need To Know

Uses:

NOVAGROUT F cement based grout is suitable for:

Grouting to:

  • ceramic tiles
  • glass and marble mosaics
  • natural stones, marble, granite, agglomerates

Applications on horizontal and vertical surfaces such as:

  • external areas, terraces, balconies, etc.
  • internal areas, wet areas like shower rooms and WC
  • underfloor heating systems
  • heavy traffic floors such as shops, hotels, industrial sites, warehouses where resistance to chemical agents is not required

Preparation of The Mix:

Mix the content of the plastic bag containing NOVAGROUT F (5 kg) with 1.3 – 1.5 liters of clean and fresh water by means of appropriate electrical stirrer at low speed (500 rpm) for at least 3 – 5 min, until a uniform mortar free of lumps is obtained. The mix has a pot life of 90 minutes. During hot periods and in general, it is recommended to avoid direct sunlight exposure of the materials (in powder or liquid form) before use, otherwise the working time is reduced. In any case avoid mixing by hand.

Technical Data:

  • Form: powder
  • Range of joints: 1-10 mm
  • POT life: ≈ 90 minutes
  • Open time: ≈ 40 minutes
  • Walkability: after 24 hours
  • Application temperature: from +5°C up to +35°C

Substrate Preparation:

The joints should be dry and clean, free from grease, dust or loose materials. Adhesive residues should be removed from the joint before applying NOVAGROUT F.

Preparation of the mix:
Mix the content of the plastic bag containing NOVAGROUT F (5 kg) with 1.3 – 1.5 liters of clean and fresh water by means of appropriate electrical stirrer at low speed (500 rpm) for at least 3 – 5 min, until a uniform mortar free of lumps is obtained. The mix has a pot life of 90 minutes. During hot periods and in general, it is recommended to avoid direct sunlight exposure of the materials (in powder or liquid form) before use, otherwise the working time is reduced. In any case avoid mixing by hand.

Application:

  • Application of the mixture to the joints is made with rubber spatula diagonally in the direction of the joints to fill the depths and widths of the gaps. With the same tool and way, the excess material is removed from the surface of the tiles. Cleaning is done as long as the product is fresh using a well-moistened hard sponge with circular movements. During the cleaning process the sponge should be cleaned at regular intervals with plenty of water. Then the surface of the tiles is cleaned with a clean, soft and slightly damp sponge. At the end of the cleaning, the tile surface should be free from traces of grout, because after hardening the product can only be removed by mechanical means.