Plastering Accessories

GENERAL INFORMATION

Use plastering accessories in construction to cope with changes in weather and other natural conditions. Changes in temperature, humidity, winds and in some areas, earthquakes have adverse effects on plaster age. On the other hand, using plastering accessories and beads allows us to support and strengthen cement plaster where different building elements meet.

Relevant Standards:

  • BS EN 13914-1:2016 For External Rendering
  • BS EN 13914-2:2016 For Internal Rendering
  • BS 6452:Part 1:1984
  • BS 5262:1991
  • BS 8212:1995

Finishing:

  1. Galvanized Steel according to BS EN 10346:2015
  2. Stainless Steel according to BS EN 10088-2:2014
  3. For interior applications:
    Galvanized Steel according to BS EN 10327 superseded by BS EN 10346:2009, zinc coated on both sides.
  4. Exterior applications and humid environment:
    Austenitic stainless steel according to BS EN 10088- Mat.No.1.4301
List of Main Plastering Accessories
metal galvanized angle bead for external corners
Corner Bead

Corner beads provide with their solid metal nose a straight corner. Expanded diamond mesh wings allow for keying the plaster right up to the nose of the bead. It is designed to protect the corners.

plaster stop bead from galvanized steel
Plaster Stop Bead

Plaster stop bead provides a straight accurate line. It is designed as a universal plaster stop used at wall ends, door and window openings to make a neat, flush frame.

metal corner plastering mesh
Corner Mesh

Corner Mesh lathes are used to prevent cracking in the plaster of the corner, and by protecting the inner corner.

strip mesh for plastering
Strip Mesh

Strip Mesh Lathes are used along stress lines where cracking is likely. They provide reinforcement to the plaster to prevent crack over joints of different materials.

7, 10, 15, 20, 25 cm metal coil lath roll
Coil Lath

Coil Lathes are used along stress lines where cracking is likely. Coil Lath provides reinforcement to the plaster to prevent crack over joints of different materials.

architectural architrave plastering bead with flange
Architrave Bead with Flange

Mainly used for decorative purposes to give a channel gap or a shadow between different walls finishes.

architectural architrave plastering bead without flange
Architrave Bead without Flange

Used for decorative purposes to give a shadow between different walls finishes without using a flange.

control joint plastering bead
Control Joint Bead

Control Joint Bead overcomes movement tolerances in plaster Expansion / Control joints provide excellent expansion control for both walls and ceiling and offers positive locking of the stucco to the edge of the joint. 

galvanized metal sheet lath for plastering
Metal Sheet Lath

Sheet lath is produced as a key for plaster when applied on suspended ceiling and walls. Sheet lath is used for encasing steel columns and beams, assisting in the protection from fire.

plastering movement bead with black rubber insert
Movement Joint Bead

Movement Beads are used to relieve the stress and strain in large plaster areas of wall and ceiling stucco areas. Additionally, to allow for movement between adjoining surface finishes.

white fiberglass mesh roll for plastering
Fiberglass Mesh

A cost-effective and a very flexible solution for anti-cracking in your project.

hy rib lath expanded metal
Hy Rib Lath

The profile of Hy Rib open mesh in combination with its ribs provide an inherently stiff sheet along its length.

metal galvanized rib lath
Rib Lath

Ribbed Lath is a versatile metal lath stiffened by the longitudinal ribs. It has V ribs and greater tensile strength offering excellent plaster base and reinforcement for all types of walls, ceilings and fireproofing of steel beam, and columns.